How To Make RC Plane from former cork

advances in technology today has brought much change in equipment entertainment or children's toys. toys that were once synonymous with the kids, but when now it is not limited in terms of age / age. both children and adults all would like to play, it's just a toy that is played today is slightly different with toys masalalu that do not use the technology and how to play just maenggunakan imagination but now has turned into a toy sophisticated technology which uses system waves. I want to share a bit of knowledge about general wave that is around us, the wave are: Wave Ultrasonic and infrasound in which the range of frequencies that can still be heard by the human ear is from 20 Hz to 20 000Hz frequencies below 20Hz are called infrasound, while those above 20 000Hz called Ultrasonic.

do you know the remote control plane is one of the main application of Bernoulli's Law.

Some equipment that applies Bernoulli law perinsip as follows;

1. atomizer repellent and perfume

2. kaburator

3. lift aircraft

4. venturi meters

5. Pitot tube



    The aircraft can fly up in the air because the air velocity through the air wing of the upper side (V2) is greater than on the bottom side of the wing (V1). therefore, the pressure of the top (P2) is smaller than the pressure at the bottom (P1) This pressure difference (P1 - P2) raises lift the magnitude defined by the following equation (picture)



F1-F2 = (P1 - P2) A

So that the aircraft can be lifted up / aerial lift aircraft must be greater than the weight of the aircraft.

If the aircraft will float with a fixed height, aircraft lift force must equal the weight of the aircraft style. F1-F2 = m.g

of the above theory we can take lessons and practice by making the plane.

at this stage let's start making.

the first step we have to do to make a remote water lontrol must prepare tools and materials.

equipment and materials used are

BASIC SETUP (60+ mph)

1. Motor: A2212 1000KV outrunner Brushless motors

2. ESC: 30A Brushless ESC

3. Prop: APC 8x4 (or better recomended)

4. Battery: 2200 mAh, 11,1V (25C or better recomended)

5. Servos: 2 each Micro Servo

6. Radio & Receiver: Any 6-channel or better (2.4 GHz preferred)

7. fly control: an open pilot

 WORKING TOOL:

1. Cutter

2. Ruler

3. pen / pencil

4. duct tape

5. Wire

6. Glue

7. carton

Materials to be used:

1. The former cork, or foamboard, or depron or fan fold foam can be used with improvised carbon spars where needed

2. flywood or Baswood sheets.

Then you can follow the shape and size below

(Pictures)

see the video below to assemble the fuselage! (VIDEO)

How To Make RC Plane from former cork
9out of 10 based on 10 ratings. 9 user reviews.

How To Make RC Airplane With Complete Part List You Needed

Along with times of change, all sorts of aspects of life experience changes towards a better and more modern in terms of human life, the development of technology and so forth.

which was initially very difficult man to its own survival than the current caused so much different from the times and all that go hand in hand with technological advances that are increasingly sophisticated or modern even in the 20th century amusement / toys still on largely operated Manually. but now at -21 century already

experienced many changes, because the tools on a wide variety of toys is already a lot of machine tools combined with the objective that can be controlled remotely and no longer need to be controlled manually clinically like a toy car that pulled the rope.

by the fact that, like the modern era when the now undeniable that everything that was once unlikely to occur or be realized so now whatever we try diligently on the effort eventually will be reached on a large sample. as before people can only move from place to place the other one can only by land and sea alone, and at present everyone is free to choose the path or means she wants, whether land, sea, or air is not hard to find that all of it can not be separated from the development of civilization and technology so that there is flashed in my mind to make a toy related to air transportation that is best. This not only controlled from ATC or air COCPIT but this of remote control plane / transmitter. seems to be more exciting because this game not only make us happy but intelligence will also be tested in aircraft manufacture this remote control,

just let us begin the initial steps:

the first step we have to do to make a remote water lontrol must prepare tools and materials.

equipment and materials used are

BASIC SETUP (60+ mph)

1. Motor: A2212 1000KV outrunner Brushless motors

2. ESC: 30A Brushless ESC

3. Prop: APC 6x4 (or better recomended)

4. Battery: 2200 mAh, 11,1V (25C or better recomended)

5. Servos: 2 each Micro Servo 

6. Radio & Receiver: Any 6-channel or better (2.4 GHz preferred)

7. fly control: open pilot

WORKING TOOL:

1. Cutter

2. Ruler

3. pen / pencil

4. duct tape

5. Wire

6. Glue

7. carton

Materials to be used:

1. The former cork, or foamboard, or depron or fan fold foam can be used with improvised carbon spars where needed

2. flywood or Baswood sheets.

Then you can follow the shape and size below

(Pictures)

see the video below to assemble the fuselage! (VIDEO)

Video Test Flight

How To Make RC Airplane With Complete Part List You Needed
9out of 10 based on 10 ratings. 9 user reviews.

How To Make Rc Sky Fighter V4

The progress of time has brought many good changes in culture and technology, such changes have brought many changes to the technology of the 21st century that such means of communication, transportation and other advanced tools that certainly beneficial to humans, but not all of the progress of an impact positive but also the negative impact which shall use modern tools to perform indecent acts. one of these technological advances have been applied in various human life and not only on basic needs but also has spread to the things that are considered trivial example, a toy remote control aircraft, not just the even development of technology has also changed the originally cast in tertiary needs, but now has been transformed into a secondary requirement disebapkan shift of human dependence on technology such as mobile phones today that name alone is not foreign to our ears. it would be nice if we use the technology towards a better, such as utilizing the internet to search for useful science, such as remote control aircraft innovation that we will create this time-based environment. remote control aircraft using former cork that will be used as an ingredient in the manufacture of bodies and wings of the aircraft that we will make.
Let we just started to discuss the preparation of the remote control aircraft
the first step we have to do to make a remote water lontrol must prepare tools and materials.

equipment and materials used are
BASIC SETUP (60+ mph)

1. Motor: A2212 1000KV outrunner Brushless motors

2. ESC: 30A Brushless ESC

3. Prop: APC 8x4 (or better recomended)

4. Battery: 2200 mAh, 11,1V (25C or better recomended)

5. Servos: 2 each Micro Servo

6. Radio & Receiver: Any 6-channel or better (2.4 GHz preferred)

7. fly control: an open pilot

 WORKING TOOL:

1. Cutter

2. Ruler

3. pen / pencil

4. duct tape

5. Wire

6. Glue

7. carton

Materials to be used:

1. The former cork, or foamboard, or depron or fan fold foam can be used with improvised carbon spars where needed

2. flywood or Baswood sheets.

Then you can follow the shape and size below

(Pictures)

see the video below to assemble the fuselage! (VIDEO)

How To Make Rc Sky Fighter V4
9out of 10 based on 10 ratings. 9 user reviews.

How I Make RC Delta Wing Easy and Cheap

Sunny day yes "if a sunny day like this the fun with friends and play remote control plane together, certainly very exciting. Today the best remote control is not only loved by the adults, but also popular with teenagers and even children, but would like to have toys are classified as luxury goods and only owned by the rich is not easy. I want to tell you that I am also not rich and do not have sufficient money, but with a strong desire coupled spirit burning, I determined that I could have it and the reason I want to make remote control aircraft utilizing cork waste is to reduce environmental pollution and in addition it has made me wish I started when I was 7 years but over the age of dreams is only wishful thinking that is not achieved. until my high school science major I started bit-by-bit to know science and technology, and when I sat ditingkatan 2 high school I started to draft an aircraft that will be equipped with a remote control me but always failed. but, I do not despair I always try and keep on trying until my friends with my neighbors who happen to have the same hobby and from then on I thought "this is the way of my success", hinga was time I meet success when working together with my best friend make a simple remote control aircraft, which use the former engine helicopter toy helicopter SYMA type V911. shaped like this;

, and using the existing machines on the heli like;
 Receiver:

 

 MOTOR:

  Battry:

 and REMOTE controle:

and one remote control plane that will be made this time is to use second-hand goods that have been discarded and can cause environmental pollution ,

The first step is a tool that must be prepared: 1. receiver; motor; and battery

                                                                            2. cutter

                                                                            3. ruler

                                                                            4. pen / pencil

                                                                            5. duct tape

                                                                            6. wire

                                                                            7. glue

And the materials to be prepared are:
 cork

 and wire

then you can follow the draft measure below, or if you want you can make other creations which shape and size are not much different from the pictures or the video below

How I Make RC Delta Wing Easy and Cheap
9out of 10 based on 10 ratings. 9 user reviews.